glide up

vendor/golang.org/x/net/ipv6/control.go

@@ -11,7 +11,7 @@ import (
 )
 
 // Note that RFC 3542 obsoletes RFC 2292 but OS X Snow Leopard and the
-// former still support RFC 2292 only. Please be aware that almost
+// former still support RFC 2292 only.  Please be aware that almost
 // all protocol implementations prohibit using a combination of RFC
 // 2292 and RFC 3542 for some practical reasons.
 

vendor/golang.org/x/net/ipv6/dgramopt_posix.go

@@ -227,7 +227,7 @@ func (c *dgramOpt) IncludeSourceSpecificGroup(ifi *net.Interface, group, source
 }
 
 // Checksum reports whether the kernel will compute, store or verify a
-// checksum for both incoming and outgoing packets. If on is true, it
+// checksum for both incoming and outgoing packets.  If on is true, it
 // returns an offset in bytes into the data of where the checksum
 // field is located.
 func (c *dgramOpt) Checksum() (on bool, offset int, err error) {
@@ -248,7 +248,7 @@ func (c *dgramOpt) Checksum() (on bool, offset int, err error) {
 	return true, offset, nil
 }
 
-// SetChecksum enables the kernel checksum processing. If on is ture,
+// SetChecksum enables the kernel checksum processing.  If on is ture,
 // the offset should be an offset in bytes into the data of where the
 // checksum field is located.
 func (c *dgramOpt) SetChecksum(on bool, offset int) error {

vendor/golang.org/x/net/ipv6/dgramopt_stub.go

@@ -94,14 +94,14 @@ func (c *dgramOpt) IncludeSourceSpecificGroup(ifi *net.Interface, group, source
 }
 
 // Checksum reports whether the kernel will compute, store or verify a
-// checksum for both incoming and outgoing packets. If on is true, it
+// checksum for both incoming and outgoing packets.  If on is true, it
 // returns an offset in bytes into the data of where the checksum
 // field is located.
 func (c *dgramOpt) Checksum() (on bool, offset int, err error) {
 	return false, 0, errOpNoSupport
 }
 
-// SetChecksum enables the kernel checksum processing. If on is ture,
+// SetChecksum enables the kernel checksum processing.  If on is ture,
 // the offset should be an offset in bytes into the data of where the
 // checksum field is located.
 func (c *dgramOpt) SetChecksum(on bool, offset int) error {

vendor/golang.org/x/net/ipv6/doc.go

@@ -22,7 +22,7 @@
 //
 // The options for unicasting are available for net.TCPConn,
 // net.UDPConn and net.IPConn which are created as network connections
-// that use the IPv6 transport. When a single TCP connection carrying
+// that use the IPv6 transport.  When a single TCP connection carrying
 // a data flow of multiple packets needs to indicate the flow is
 // important, Conn is used to set the traffic class field on the IPv6
 // header for each packet.
@@ -57,7 +57,7 @@
 //
 // The options for multicasting are available for net.UDPConn and
 // net.IPconn which are created as network connections that use the
-// IPv6 transport. A few network facilities must be prepared before
+// IPv6 transport.  A few network facilities must be prepared before
 // you begin multicasting, at a minimum joining network interfaces and
 // multicast groups.
 //
@@ -81,7 +81,7 @@
 //	defer c.Close()
 //
 // Second, the application joins multicast groups, starts listening to
-// the groups on the specified network interfaces. Note that the
+// the groups on the specified network interfaces.  Note that the
 // service port for transport layer protocol does not matter with this
 // operation as joining groups affects only network and link layer
 // protocols, such as IPv6 and Ethernet.
@@ -95,7 +95,7 @@
 //	}
 //
 // The application might set per packet control message transmissions
-// between the protocol stack within the kernel. When the application
+// between the protocol stack within the kernel.  When the application
 // needs a destination address on an incoming packet,
 // SetControlMessage of PacketConn is used to enable control message
 // transmissions.
@@ -144,7 +144,7 @@
 // More multicasting
 //
 // An application that uses PacketConn may join multiple multicast
-// groups. For example, a UDP listener with port 1024 might join two
+// groups.  For example, a UDP listener with port 1024 might join two
 // different groups across over two different network interfaces by
 // using:
 //
@@ -165,7 +165,7 @@
 //	}
 //
 // It is possible for multiple UDP listeners that listen on the same
-// UDP port to join the same multicast group. The net package will
+// UDP port to join the same multicast group.  The net package will
 // provide a socket that listens to a wildcard address with reusable
 // UDP port when an appropriate multicast address prefix is passed to
 // the net.ListenPacket or net.ListenUDP.

vendor/golang.org/x/net/ipv6/endpoint.go

@@ -55,8 +55,8 @@ func NewConn(c net.Conn) *Conn {
 }
 
 // A PacketConn represents a packet network endpoint that uses IPv6
-// transport. It is used to control several IP-level socket options
-// including IPv6 header manipulation. It also provides datagram
+// transport.  It is used to control several IP-level socket options
+// including IPv6 header manipulation.  It also provides datagram
 // based network I/O methods specific to the IPv6 and higher layer
 // protocols such as OSPF, GRE, and UDP.
 type PacketConn struct {

vendor/golang.org/x/net/ipv6/go19_test.go

@@ -1,11 +0,0 @@
-// Copyright 2017 The Go Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style
-// license that can be found in the LICENSE file.
-
-// +build go1.9
-
-package ipv6
-
-func init() {
-	disableTests = true
-}

vendor/golang.org/x/net/ipv6/ipv6_test.go

@@ -1,22 +0,0 @@
-// Copyright 2017 The Go Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style
-// license that can be found in the LICENSE file.
-
-package ipv6
-
-import (
-	"fmt"
-	"os"
-	"testing"
-)
-
-var disableTests = false
-
-func TestMain(m *testing.M) {
-	if disableTests {
-		fmt.Fprintf(os.Stderr, "ipv6 tests disabled in Go 1.9 until netreflect is fixed (Issue 19051)\n")
-		os.Exit(0)
-	}
-	// call flag.Parse() here if TestMain uses flags
-	os.Exit(m.Run())
-}

vendor/golang.org/x/net/ipv6/payload_cmsg.go

@@ -12,7 +12,7 @@ import (
 )
 
 // ReadFrom reads a payload of the received IPv6 datagram, from the
-// endpoint c, copying the payload into b. It returns the number of
+// endpoint c, copying the payload into b.  It returns the number of
 // bytes copied into b, the control message cm and the source address
 // src of the received datagram.
 func (c *payloadHandler) ReadFrom(b []byte) (n int, cm *ControlMessage, src net.Addr, err error) {
@@ -43,9 +43,9 @@ func (c *payloadHandler) ReadFrom(b []byte) (n int, cm *ControlMessage, src net.
 }
 
 // WriteTo writes a payload of the IPv6 datagram, to the destination
-// address dst through the endpoint c, copying the payload from b. It
-// returns the number of bytes written. The control message cm allows
-// the IPv6 header fields and the datagram path to be specified. The
+// address dst through the endpoint c, copying the payload from b.  It
+// returns the number of bytes written.  The control message cm allows
+// the IPv6 header fields and the datagram path to be specified.  The
 // cm may be nil if control of the outgoing datagram is not required.
 func (c *payloadHandler) WriteTo(b []byte, cm *ControlMessage, dst net.Addr) (n int, err error) {
 	if !c.ok() {

vendor/golang.org/x/net/ipv6/payload_nocmsg.go

@@ -12,7 +12,7 @@ import (
 )
 
 // ReadFrom reads a payload of the received IPv6 datagram, from the
-// endpoint c, copying the payload into b. It returns the number of
+// endpoint c, copying the payload into b.  It returns the number of
 // bytes copied into b, the control message cm and the source address
 // src of the received datagram.
 func (c *payloadHandler) ReadFrom(b []byte) (n int, cm *ControlMessage, src net.Addr, err error) {
@@ -26,9 +26,9 @@ func (c *payloadHandler) ReadFrom(b []byte) (n int, cm *ControlMessage, src net.
 }
 
 // WriteTo writes a payload of the IPv6 datagram, to the destination
-// address dst through the endpoint c, copying the payload from b. It
-// returns the number of bytes written. The control message cm allows
-// the IPv6 header fields and the datagram path to be specified. The
+// address dst through the endpoint c, copying the payload from b.  It
+// returns the number of bytes written.  The control message cm allows
+// the IPv6 header fields and the datagram path to be specified.  The
 // cm may be nil if control of the outgoing datagram is not required.
 func (c *payloadHandler) WriteTo(b []byte, cm *ControlMessage, dst net.Addr) (n int, err error) {
 	if !c.ok() {